Geforce File Manager

NAME	SIZE	ACTIONS
📁 bitops		[ DEL ]
📁 vdso		[ DEL ]
📄 4level-fixup.h	1,098 B	[ EDIT ] \| [ DEL ]
📄 5level-fixup.h	1,273 B	[ EDIT ] \| [ DEL ]
📄 asm-offsets.h	35 B	[ EDIT ] \| [ DEL ]
📄 asm-prototypes.h	507 B	[ EDIT ] \| [ DEL ]
📄 atomic-instrumented.h	13,623 B	[ EDIT ] \| [ DEL ]
📄 atomic-long.h	8,048 B	[ EDIT ] \| [ DEL ]
📄 atomic.h	4,391 B	[ EDIT ] \| [ DEL ]
📄 atomic64.h	1,797 B	[ EDIT ] \| [ DEL ]
📄 audit_change_attr.h	484 B	[ EDIT ] \| [ DEL ]
📄 audit_dir_write.h	528 B	[ EDIT ] \| [ DEL ]
📄 audit_read.h	241 B	[ EDIT ] \| [ DEL ]
📄 audit_signal.h	36 B	[ EDIT ] \| [ DEL ]
📄 audit_write.h	461 B	[ EDIT ] \| [ DEL ]
📄 barrier.h	6,868 B	[ EDIT ] \| [ DEL ]
📄 bitops-instrumented.h	7,909 B	[ EDIT ] \| [ DEL ]
📄 bitops.h	1,119 B	[ EDIT ] \| [ DEL ]
📄 bitsperlong.h	592 B	[ EDIT ] \| [ DEL ]
📄 bug.h	6,720 B	[ EDIT ] \| [ DEL ]
📄 bugs.h	267 B	[ EDIT ] \| [ DEL ]
📄 cache.h	384 B	[ EDIT ] \| [ DEL ]
📄 cacheflush.h	1,340 B	[ EDIT ] \| [ DEL ]
📄 checksum.h	2,329 B	[ EDIT ] \| [ DEL ]
📄 cmpxchg-local.h	1,464 B	[ EDIT ] \| [ DEL ]
📄 cmpxchg.h	2,286 B	[ EDIT ] \| [ DEL ]
📄 compat.h	658 B	[ EDIT ] \| [ DEL ]
📄 current.h	256 B	[ EDIT ] \| [ DEL ]
📄 delay.h	1,157 B	[ EDIT ] \| [ DEL ]
📄 device.h	245 B	[ EDIT ] \| [ DEL ]
📄 div64.h	7,458 B	[ EDIT ] \| [ DEL ]
📄 dma-contiguous.h	238 B	[ EDIT ] \| [ DEL ]
📄 dma-mapping.h	248 B	[ EDIT ] \| [ DEL ]
📄 dma.h	553 B	[ EDIT ] \| [ DEL ]
📄 early_ioremap.h	1,696 B	[ EDIT ] \| [ DEL ]
📄 emergency-restart.h	248 B	[ EDIT ] \| [ DEL ]
📄 error-injection.h	1,178 B	[ EDIT ] \| [ DEL ]
📄 exec.h	667 B	[ EDIT ] \| [ DEL ]
📄 export.h	2,002 B	[ EDIT ] \| [ DEL ]
📄 extable.h	802 B	[ EDIT ] \| [ DEL ]
📄 fb.h	271 B	[ EDIT ] \| [ DEL ]
📄 fixmap.h	2,904 B	[ EDIT ] \| [ DEL ]
📄 ftrace.h	460 B	[ EDIT ] \| [ DEL ]
📄 futex.h	2,964 B	[ EDIT ] \| [ DEL ]
📄 getorder.h	1,487 B	[ EDIT ] \| [ DEL ]
📄 gpio.h	4,558 B	[ EDIT ] \| [ DEL ]
📄 hardirq.h	532 B	[ EDIT ] \| [ DEL ]
📄 hugetlb.h	1,326 B	[ EDIT ] \| [ DEL ]
📄 hw_irq.h	270 B	[ EDIT ] \| [ DEL ]
📄 hyperv-tlfs.h	20,696 B	[ EDIT ] \| [ DEL ]
📄 ide_iops.h	791 B	[ EDIT ] \| [ DEL ]
📄 int-ll64.h	863 B	[ EDIT ] \| [ DEL ]
📄 io.h	24,167 B	[ EDIT ] \| [ DEL ]
📄 ioctl.h	506 B	[ EDIT ] \| [ DEL ]
📄 iomap.h	4,033 B	[ EDIT ] \| [ DEL ]
📄 irq.h	403 B	[ EDIT ] \| [ DEL ]
📄 irq_regs.h	980 B	[ EDIT ] \| [ DEL ]
📄 irq_work.h	194 B	[ EDIT ] \| [ DEL ]
📄 irqflags.h	1,543 B	[ EDIT ] \| [ DEL ]
📄 kdebug.h	182 B	[ EDIT ] \| [ DEL ]
📄 kmap_size.h	263 B	[ EDIT ] \| [ DEL ]
📄 kprobes.h	868 B	[ EDIT ] \| [ DEL ]
📄 kvm_para.h	549 B	[ EDIT ] \| [ DEL ]
📄 kvm_types.h	113 B	[ EDIT ] \| [ DEL ]
📄 linkage.h	225 B	[ EDIT ] \| [ DEL ]
📄 local.h	2,282 B	[ EDIT ] \| [ DEL ]
📄 local64.h	3,887 B	[ EDIT ] \| [ DEL ]
📄 mcs_spinlock.h	260 B	[ EDIT ] \| [ DEL ]
📄 memory_model.h	2,209 B	[ EDIT ] \| [ DEL ]
📄 mm-arch-hooks.h	388 B	[ EDIT ] \| [ DEL ]
📄 mm_hooks.h	854 B	[ EDIT ] \| [ DEL ]
📄 mmiowb.h	1,731 B	[ EDIT ] \| [ DEL ]
📄 mmiowb_types.h	249 B	[ EDIT ] \| [ DEL ]
📄 mmu.h	449 B	[ EDIT ] \| [ DEL ]
📄 mmu_context.h	881 B	[ EDIT ] \| [ DEL ]
📄 module.h	1,118 B	[ EDIT ] \| [ DEL ]
📄 mshyperv.h	8,592 B	[ EDIT ] \| [ DEL ]
📄 msi.h	1,053 B	[ EDIT ] \| [ DEL ]
📄 numa.h	1,544 B	[ EDIT ] \| [ DEL ]
📄 page.h	2,454 B	[ EDIT ] \| [ DEL ]
📄 param.h	367 B	[ EDIT ] \| [ DEL ]
📄 parport.h	604 B	[ EDIT ] \| [ DEL ]
📄 pci.h	401 B	[ EDIT ] \| [ DEL ]
📄 pci_iomap.h	1,775 B	[ EDIT ] \| [ DEL ]
📄 percpu.h	13,026 B	[ EDIT ] \| [ DEL ]
📄 pgalloc.h	342 B	[ EDIT ] \| [ DEL ]
📄 pgtable-nop4d-hack.h	1,965 B	[ EDIT ] \| [ DEL ]
📄 pgtable-nop4d.h	1,772 B	[ EDIT ] \| [ DEL ]
📄 pgtable-nopmd.h	1,944 B	[ EDIT ] \| [ DEL ]
📄 pgtable-nopud.h	2,071 B	[ EDIT ] \| [ DEL ]
📄 pgtable.h	33,765 B	[ EDIT ] \| [ DEL ]
📄 pgtable_uffd.h	1,052 B	[ EDIT ] \| [ DEL ]
📄 preempt.h	1,994 B	[ EDIT ] \| [ DEL ]
📄 ptrace.h	1,615 B	[ EDIT ] \| [ DEL ]
📄 qrwlock.h	4,315 B	[ EDIT ] \| [ DEL ]
📄 qrwlock_types.h	682 B	[ EDIT ] \| [ DEL ]
📄 qspinlock.h	3,816 B	[ EDIT ] \| [ DEL ]
📄 qspinlock_types.h	2,590 B	[ EDIT ] \| [ DEL ]
📄 resource.h	1,100 B	[ EDIT ] \| [ DEL ]
📄 seccomp.h	1,328 B	[ EDIT ] \| [ DEL ]
📄 sections.h	5,306 B	[ EDIT ] \| [ DEL ]
📄 segment.h	249 B	[ EDIT ] \| [ DEL ]
📄 serial.h	345 B	[ EDIT ] \| [ DEL ]
📄 set_memory.h	362 B	[ EDIT ] \| [ DEL ]
📄 signal.h	308 B	[ EDIT ] \| [ DEL ]
📄 simd.h	436 B	[ EDIT ] \| [ DEL ]
📄 sizes.h	78 B	[ EDIT ] \| [ DEL ]
📄 spinlock.h	329 B	[ EDIT ] \| [ DEL ]
📄 statfs.h	169 B	[ EDIT ] \| [ DEL ]
📄 string.h	281 B	[ EDIT ] \| [ DEL ]
📄 switch_to.h	962 B	[ EDIT ] \| [ DEL ]
📄 syscall.h	6,389 B	[ EDIT ] \| [ DEL ]
📄 syscalls.h	739 B	[ EDIT ] \| [ DEL ]
📄 termios-base.h	2,164 B	[ EDIT ] \| [ DEL ]
📄 termios.h	2,877 B	[ EDIT ] \| [ DEL ]
📄 timex.h	508 B	[ EDIT ] \| [ DEL ]
📄 tlb.h	19,685 B	[ EDIT ] \| [ DEL ]
📄 tlbflush.h	485 B	[ EDIT ] \| [ DEL ]
📄 topology.h	2,234 B	[ EDIT ] \| [ DEL ]
📄 trace_clock.h	391 B	[ EDIT ] \| [ DEL ]
📄 uaccess.h	5,272 B	[ EDIT ] \| [ DEL ]
📄 unaligned.h	1,078 B	[ EDIT ] \| [ DEL ]
📄 unistd.h	318 B	[ EDIT ] \| [ DEL ]
📄 user.h	242 B	[ EDIT ] \| [ DEL ]
📄 vga.h	587 B	[ EDIT ] \| [ DEL ]
📄 vmlinux.lds.h	28,848 B	[ EDIT ] \| [ DEL ]
📄 vtime.h	52 B	[ EDIT ] \| [ DEL ]
📄 word-at-a-time.h	2,817 B	[ EDIT ] \| [ DEL ]
📄 xor.h	13,961 B	[ EDIT ] \| [ DEL ]

[ CLOSE ]

EDIT: syscall.h

/*
 * Access to user system call parameters and results
 *
 * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
 *
 * This copyrighted material is made available to anyone wishing to use,
 * modify, copy, or redistribute it subject to the terms and conditions
 * of the GNU General Public License v.2.
 *
 * This file is a stub providing documentation for what functions
 * asm-ARCH/syscall.h files need to define.  Most arch definitions
 * will be simple inlines.
 *
 * All of these functions expect to be called with no locks,
 * and only when the caller is sure that the task of interest
 * cannot return to user mode while we are looking at it.
 */

#ifndef _ASM_SYSCALL_H
#define _ASM_SYSCALL_H	1

struct task_struct;
struct pt_regs;

/**
 * syscall_get_nr - find what system call a task is executing
 * @task:	task of interest, must be blocked
 * @regs:	task_pt_regs() of @task
 *
 * If @task is executing a system call or is at system call
 * tracing about to attempt one, returns the system call number.
 * If @task is not executing a system call, i.e. it's blocked
 * inside the kernel for a fault or signal, returns -1.
 *
 * Note this returns int even on 64-bit machines.  Only 32 bits of
 * system call number can be meaningful.  If the actual arch value
 * is 64 bits, this truncates to 32 bits so 0xffffffff means -1.
 *
 * It's only valid to call this when @task is known to be blocked.
 */
int syscall_get_nr(struct task_struct *task, struct pt_regs *regs);

/**
 * syscall_rollback - roll back registers after an aborted system call
 * @task:	task of interest, must be in system call exit tracing
 * @regs:	task_pt_regs() of @task
 *
 * It's only valid to call this when @task is stopped for system
 * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT),
 * after tracehook_report_syscall_entry() returned nonzero to prevent
 * the system call from taking place.
 *
 * This rolls back the register state in @regs so it's as if the
 * system call instruction was a no-op.  The registers containing
 * the system call number and arguments are as they were before the
 * system call instruction.  This may not be the same as what the
 * register state looked like at system call entry tracing.
 */
void syscall_rollback(struct task_struct *task, struct pt_regs *regs);

/**
 * syscall_get_error - check result of traced system call
 * @task:	task of interest, must be blocked
 * @regs:	task_pt_regs() of @task
 *
 * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
 *
 * It's only valid to call this when @task is stopped for tracing on exit
 * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
 */
long syscall_get_error(struct task_struct *task, struct pt_regs *regs);

/**
 * syscall_get_return_value - get the return value of a traced system call
 * @task:	task of interest, must be blocked
 * @regs:	task_pt_regs() of @task
 *
 * Returns the return value of the successful system call.
 * This value is meaningless if syscall_get_error() returned nonzero.
 *
 * It's only valid to call this when @task is stopped for tracing on exit
 * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
 */
long syscall_get_return_value(struct task_struct *task, struct pt_regs *regs);

/**
 * syscall_set_return_value - change the return value of a traced system call
 * @task:	task of interest, must be blocked
 * @regs:	task_pt_regs() of @task
 * @error:	negative error code, or zero to indicate success
 * @val:	user return value if @error is zero
 *
 * This changes the results of the system call that user mode will see.
 * If @error is zero, the user sees a successful system call with a
 * return value of @val.  If @error is nonzero, it's a negated errno
 * code; the user sees a failed system call with this errno code.
 *
 * It's only valid to call this when @task is stopped for tracing on exit
 * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
 */
void syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
			      int error, long val);

/**
 * syscall_get_arguments - extract system call parameter values
 * @task:	task of interest, must be blocked
 * @regs:	task_pt_regs() of @task
 * @i:		argument index [0,5]
 * @n:		number of arguments; n+i must be [1,6].
 * @args:	array filled with argument values
 *
 * Fetches @n arguments to the system call starting with the @i'th argument
 * (from 0 through 5).  Argument @i is stored in @args[0], and so on.
 * An arch inline version is probably optimal when @i and @n are constants.
 *
 * It's only valid to call this when @task is stopped for tracing on
 * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
 * It's invalid to call this with @i + @n > 6; we only support system calls
 * taking up to 6 arguments.
 */
void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
			   unsigned int i, unsigned int n, unsigned long *args);

/**
 * syscall_set_arguments - change system call parameter value
 * @task:	task of interest, must be in system call entry tracing
 * @regs:	task_pt_regs() of @task
 * @i:		argument index [0,5]
 * @n:		number of arguments; n+i must be [1,6].
 * @args:	array of argument values to store
 *
 * Changes @n arguments to the system call starting with the @i'th argument.
 * Argument @i gets value @args[0], and so on.
 * An arch inline version is probably optimal when @i and @n are constants.
 *
 * It's only valid to call this when @task is stopped for tracing on
 * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
 * It's invalid to call this with @i + @n > 6; we only support system calls
 * taking up to 6 arguments.
 */
void syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
			   unsigned int i, unsigned int n,
			   const unsigned long *args);

/**
 * syscall_get_arch - return the AUDIT_ARCH for the current system call
 * @task:	task of interest, must be blocked
 *
 * Returns the AUDIT_ARCH_* based on the system call convention in use.
 *
 * It's only valid to call this when @task is stopped on entry to a system
 * call, due to %TIF_SYSCALL_TRACE, %TIF_SYSCALL_AUDIT, or %TIF_SECCOMP.
 *
 * Architectures which permit CONFIG_HAVE_ARCH_SECCOMP_FILTER must
 * provide an implementation of this.
 */
int syscall_get_arch(struct task_struct *task);
#endif	/* _ASM_SYSCALL_H */