[ SYSTEM ]: Linux srv.persadacompanies.com 4.18.0-553.56.1.el8_10.x86_64 #1 SMP Tue Jun 10 05:00:59 EDT 2025 x86_64
[ SERVER ]: Apache | PHP: 8.4.20
[ USER ]: persadamedika | IP: 45.64.1.108
GEFORCE FILE MANAGER
/
usr
/
src
/
kernels
/
4.18.0-553.56.1.el8_10.x86_64
/
include
/
linux
/
spi
/
UPLOAD:
NAME
SIZE
QUICK PERMS
ACTIONS
📄 ad7877.h
835 B
SET
[ EDIT ]
|
[ DEL ]
📄 adi_spi3.h
15,467 B
SET
[ EDIT ]
|
[ DEL ]
📄 ads7846.h
2,065 B
SET
[ EDIT ]
|
[ DEL ]
📄 at73c213.h
828 B
SET
[ EDIT ]
|
[ DEL ]
📄 at86rf230.h
724 B
SET
[ EDIT ]
|
[ DEL ]
📄 cc2520.h
620 B
SET
[ EDIT ]
|
[ DEL ]
📄 corgi_lcd.h
460 B
SET
[ EDIT ]
|
[ DEL ]
📄 ds1305.h
1,107 B
SET
[ EDIT ]
|
[ DEL ]
📄 eeprom.h
1,217 B
SET
[ EDIT ]
|
[ DEL ]
📄 flash.h
1,023 B
SET
[ EDIT ]
|
[ DEL ]
📄 ifx_modem.h
616 B
SET
[ EDIT ]
|
[ DEL ]
📄 l4f00242t03.h
847 B
SET
[ EDIT ]
|
[ DEL ]
📄 libertas_spi.h
907 B
SET
[ EDIT ]
|
[ DEL ]
📄 lms283gf05.h
775 B
SET
[ EDIT ]
|
[ DEL ]
📄 max7301.h
939 B
SET
[ EDIT ]
|
[ DEL ]
📄 mc33880.h
196 B
SET
[ EDIT ]
|
[ DEL ]
📄 mcp23s08.h
685 B
SET
[ EDIT ]
|
[ DEL ]
📄 mmc_spi.h
1,958 B
SET
[ EDIT ]
|
[ DEL ]
📄 mxs-spi.h
5,367 B
SET
[ EDIT ]
|
[ DEL ]
📄 pxa2xx_spi.h
1,535 B
SET
[ EDIT ]
|
[ DEL ]
📄 rspi.h
715 B
SET
[ EDIT ]
|
[ DEL ]
📄 s3c24xx.h
816 B
SET
[ EDIT ]
|
[ DEL ]
📄 sh_hspi.h
572 B
SET
[ EDIT ]
|
[ DEL ]
📄 sh_msiof.h
357 B
SET
[ EDIT ]
|
[ DEL ]
📄 spi-fsl-dspi.h
955 B
SET
[ EDIT ]
|
[ DEL ]
📄 spi-mem.h
7,063 B
SET
[ EDIT ]
|
[ DEL ]
📄 spi.h
51,523 B
SET
[ EDIT ]
|
[ DEL ]
📄 spi_bitbang.h
1,544 B
SET
[ EDIT ]
|
[ DEL ]
📄 spi_gpio.h
724 B
SET
[ EDIT ]
|
[ DEL ]
📄 spi_oc_tiny.h
628 B
SET
[ EDIT ]
|
[ DEL ]
📄 tdo24m.h
210 B
SET
[ EDIT ]
|
[ DEL ]
📄 tle62x0.h
660 B
SET
[ EDIT ]
|
[ DEL ]
📄 xilinx_spi.h
627 B
SET
[ EDIT ]
|
[ DEL ]
DELETE SELECTED
[ CLOSE ]
EDIT: ds1305.h
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __LINUX_SPI_DS1305_H #define __LINUX_SPI_DS1305_H /* * One-time configuration for ds1305 and ds1306 RTC chips. * * Put a pointer to this in spi_board_info.platform_data if you want to * be sure that Linux (re)initializes this as needed ... after losing * backup power, and potentially on the first boot. */ struct ds1305_platform_data { /* Trickle charge configuration: it's OK to leave out the MAGIC * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K. */ #define DS1305_TRICKLE_MAGIC 0xa0 #define DS1305_TRICKLE_DS2 0x08 /* two diodes */ #define DS1305_TRICKLE_DS1 0x04 /* one diode */ #define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */ #define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */ #define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */ u8 trickle; /* set only on ds1306 parts */ bool is_ds1306; /* ds1306 only: enable 1 Hz output */ bool en_1hz; /* REVISIT: the driver currently expects nINT0 to be wired * as the alarm IRQ. ALM1 may also need to be set up ... */ }; #endif /* __LINUX_SPI_DS1305_H */